Woodezine End Table: Parts List
 

Notes:

The shop drawing at left is an isometric rendering (that is, there is no perspective). For example, the legs are actually 1-1/2" x 1-1/2", but in an isometric they will look like they are not square.

The top sits on this skeleton so that it is flush at the back and has overhangs in front and along the sides.

All dimensions are in inches.


PART
Qty
THICK
WIDE
LONG
NOTES

Top

1
3/4
19-1/4
22
Grain runs side-to-side (so table is 22 wide).
Legs
4
1-1/2
1-1/2
25-1/2
 
Side Rails
4
1-1/2
1-1/2
15
 
Front & Back Rails
4
1-1/2
1-1/2
17-3/8
 
Back Panel
1
3/4
18
18
Oversze: trim to fit.
Back Panel Cleats
2
3/4
1-1/2
18-1/4
Make a little long and trim for a perfect cut.
Side Panel Boards
4
3/4
7-1/2
19-3/4
Trim to length and width.
Side Panel Splines
2
1/4
3/4
19-3/4
Trim to length.
Box Moldings
6
3/4
1-1/2
120
Trim to fit.
Door jambs
2
3/4
1-1/2
16-5/8
 
Bottom Panel
1
3/4
17-3/8
15
 
Bottom Panel Cleats
4
3/4
3/4
66
Cut to fit with mitered corners.
Door Stiles
2
3/4
1-7/8
16-1/2
 
Door Rails
2
3/4
1-7/8
12-1/8
Plus the length of the tenon.
Door Panel
1
1/4
14-1/2
13-3/4
Trim to fit - depends on the depth of the groove.
Door Hinges
3
Brass butt hinges, 1-1/2" long
Door Lock
1
Standard brass cam lock, keyed.

TopBack to WoodEzine homepageBack to the article